Difference between revisions of "Heavy Gas Cherenkov"

Revision as of 15:08, 18 April 2023

info

email list

HGC emaillist,"solid_hgc at jlab.org", registration and archive

conference system

Blue Jeans with meeting ID: 591770580
Audio via phone (better than computer): dial +1-888-240-2560 (US or Canada only) or http://bluejeans.com/numbers for other countries,
then enter the meeting ID.
Desktop sharing and video via web: https://bluejeans.com/591770580
Or video via a Video Conferencing System: dial 199.48.152.152, then enter the meeting ID.

file sharing

We use a dropbox folder. ask Zhiwen Zhao zwzhao@jlab.org with your dropbox account

Integration into SoLID

refer to SoLID_Engineering_Integration_and_CAD page Engineering Integration and CAD

prototyping and R&D

window

• material
  • tedlar/mylar/tedlar from Madico
  • "We have used this type of material for spectrometer vacuum windows. It is made of high end sail cloth (actual sail material for boats). It is not the easiest material to work with but will most likely work for you. You may have to pretension the cloth depending on the manufacturer." from David Meekins of jlab target group, https://www.sailmakerssupply.com/product/racing-laminate-sailcloth-seconds/sailcloth, It's actually Kevlar/Mylar laminates
  • cheap kevlar, http://www.mcmaster.com/#kevlar/=14kwgqs , Its thickness 0.6mm is a bit bigger than 0.4mm used by BNL vacuum window, Not sure if it's because it's "cut resistant"
  • 2024 Al ~1mm thick

• test
  • test 0: Test of 1.5mil Tedlar/3 mil PET/1.5 mil Tedlar material obtained from CLAS LTCC. with video showing slow motion of bursting and fast motion of the test
  • test 1: Full size test of 5 mil Mylar/12 mil Kevlar window material. Dec 5, 2016.
  • test 2: Full size test of 5 mil Mylar/12 mil Kevlar window with circumferential epoxy. Feb 16, 2017.
  • test 3: Small size test of double layer 5 mil Mylar/12 mil Kevlar window with epoxy coating. June 9, 2017.
  • test 4: Small size tests of five different configurations of 5 mil Mylar/12 mil Kevlar window with epoxy coating. Aug 16, 2017.

readout

mirror

base

coating

HGC mirror drawing and SBU half mirror Al support structure at p12 of https://solid.jlab.org/DocDB/0002/000254/003/solid_hgc_zwzhao_20200608.pdf

test

• SHMS mirror test stand info, ch5 of https://misportal.jlab.org/ul/publications/downloadFile.cfm?pub_id=12091

• CLAS12 RICH mirror test stand info
  • https://clasweb.jlab.org/wiki/images/3/35/CMA_report.pdf, That refers to a mirror technology that was rejected (rohacell core, not stable enough) but explain part of the characterization we made.
  • additional information from the initial evaluation of the real mirrors: https://clasweb.jlab.org/wiki/images/4/4c/2016-05-20_SphericalMirrors.pdf, https://clasweb.jlab.org/wiki/images/2/2a/2016-07-01_SphericalMirrorsCMM.pdf, https://userweb.jlab.org/~tlemon/RICH/D0_Measurement_Results_2016-10-21.pdf
  • This is the new jlab detector support group reflectivity test-station: https://userweb.jlab.org/~tlemon/RICH/New%20Reflectivity%20Test%20Station%202022-04-22.pdf