Difference between revisions of "FY2022 beam test low rate summary"
From solidwiki
(→Run Information) |
(→Test Condition) |
||
| Line 4: | Line 4: | ||
==Test Condition== | ==Test Condition== | ||
*The detector stand was located at 82 deg beam-left. | *The detector stand was located at 82 deg beam-left. | ||
| + | *Compared with the later 7-deg and 18-deg setup, the FASPD was in the test setup, and there were only two GEM chambers. | ||
==Run Information== | ==Run Information== | ||
Revision as of 20:57, 19 May 2023
Goals
- Detector and system checkout
Test Condition
- The detector stand was located at 82 deg beam-left.
- Compared with the later 7-deg and 18-deg setup, the FASPD was in the test setup, and there were only two GEM chambers.
Run Information
- Detector calibration:
- Most scintillators and Preshower show MIP and some double-MIP structure
- At this large (82 deg) angle, pions would not leave MIP in the Shower
- For Shower modules, only electrons deposit large amount of energy and we managed to compare data with simulation and use the histogram slope at high energy side for calibration purposes
- Some mixed up of Shower HV for part of the run period that caused the 3 shower blocks to be grossly mismatched.
- Jixie's online run list on redmine
- Jixie's cable and HV map on redmine
