Difference between revisions of "Solid Optics"

From solidwiki
Jump to: navigation, search
(Created 03/13/12(Riordan), Last modified 03/13/12(Riordan))
 
(Blanked the page)
 
Line 1: Line 1:
The most important aspects of the optics is the momentum resolution required, how to do the calibration: specifically using some combination of ep elastics, fixed point targets, straight throughs, and angle determination.
 
  
Paul's document on ideas and requirements [http://hallaweb.jlab.org/12GeV/SoLID/download/general/calibrate.ps ps]
 
 
==Optics Calibration==
 
 
Optics calibration can be done with some combination of the following
 
*ep elastics
 
*Fixed point target
 
**Carbon foils
 
*Straight through
 
**Drilling plugable holes through baffles
 
**Rotating baffles
 
**Using existing slits
 
*Angle determination
 
**Using straight-through calibration and model field changes to angle
 
**Sci-fi tracker just by the target
 
 
==Resolution with GEMs==
 
*Xin Qian [http://www.jlab.org/~riordan/About_Resolutions.pdf pdf] [https://hallaweb.jlab.org/dvcslog/SoLID/22 DVCSLog]
 
 
==Elastic Rates==
 
 
Elastic rates for LH2, luminosity of <math>1\times10^{37}</math>Hz/cm<math>{}^2</math>, which is about 1 uA.
 
 
{|
 
|-
 
|[[Image:Elastics 044.png|400px]]
 
|[[Image:Elastics 044 pvr.png|400px]]
 
|-
 
|4.4 GeV Rate - Rate [Hz/uA/mm] vs. r [mm]
 
|4.4 GeV - Momentum [MeV] vs. r [mm]
 
|-
 
|[[Image:Elastics 088.png|400px]]
 
|[[Image:Elastics 088 pvr.png|400px]]
 
|-
 
|8.8 GeV Rate - Rate [Hz/uA/mm] vs. r [mm]
 
|8.8 GeV - Momentum [MeV] vs. r [mm]
 
|-
 
|[[Image:Elastics 110.png|400px]]
 
|[[Image:Elastics 110 pvr.png|400px]]
 
|-
 
|11 GeV Rate - Rate [Hz/uA/mm] vs. r [mm]
 
|11 GeV - Momentum [MeV] vs. r [mm]
 
|}
 
 
===Summary===
 
 
To get 200/cm/sector at 50uA
 
 
{|
 
! E [GeV]
 
! t [hrs]
 
|-
 
| 4.4
 
| 0.006
 
|-
 
| 8.8
 
| 1.6
 
|-
 
| 11
 
| 6
 
|}
 

Latest revision as of 19:45, 3 December 2020