|
|
| Line 1: |
Line 1: |
| − | == general ==
| |
| | | | |
| − | = test =
| |
| − |
| |
| − | meeting https://hallaweb.jlab.org/wiki/index.php/Meeting_solid_preRD_cher
| |
| − |
| |
| − | data location /work/halla/solid/cc_pro
| |
| − |
| |
| − | info and plot location https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro
| |
| − |
| |
| − | == pmt ==
| |
| − |
| |
| − | H12700 general specs https://www.hamamatsu.com/resources/pdf/etd/H12700_H14220_TPMH1379E.pdf
| |
| − |
| |
| − | PMT used in test https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/pmt/
| |
| − |
| |
| − | pixel_id and maroc_id are shown at https://clasweb.jlab.org/wiki/images/4/46/Maroc_ch.pdf
| |
| − |
| |
| − | == lasertest ==
| |
| − |
| |
| − | MAPMT test with laser, maroc pixel by PC and sum by fadc, at CLAS12 laser test stand
| |
| − |
| |
| − | note,log,plot https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/lasertest/
| |
| − |
| |
| − | == benchtest ==
| |
| − |
| |
| − | === note in general ===
| |
| − |
| |
| − | MAPMT readout assembly https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/mapmt_readout_assembly.pdf
| |
| − |
| |
| − | photo of maroc sum https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/benchtest/photo_mapmt_maroc_sum/
| |
| − |
| |
| − | photo of simple sum https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/benchtest/photo_mapmt_simple_sum/
| |
| − |
| |
| − | decoder and analysis code [https://eicweb.phy.anl.gov/cherenkov/fadc_decoder]
| |
| − |
| |
| − | '''keep FPGA boards cool <70C whenever its LV is on !!!'''
| |
| − | '''the small fan needs to be on at all time and it can keep FPGA board below 50C'''
| |
| − |
| |
| − | <pre>
| |
| − |
| |
| − | monitor temperature in unit C when last ssp scaler run happened by
| |
| − | ll /home/clasrun/rich/suite1.0/data/temperature/ssprich_Temperatures.txt
| |
| − | tail -n138 /home/clasrun/rich/suite1.0/data/temperature/ssprich_Temperatures.txt
| |
| − |
| |
| − | If it's outdated and you want to check current temperature, take a scaler run as follows
| |
| − | > ssh root@sbsvme22
| |
| − | > source /usr/clas12/release/1.4.0/setup
| |
| − | > setenv RICH_SUITE /home/clasrun/rich/suite1.0
| |
| − | > cd $RICH_SUITE/sw/daq
| |
| − | > ssptest_ConfigureAll 230 64 0
| |
| − | > ./thr_scan.sh 170 175 0
| |
| − | > (You have to reset coda after any scaler operation so coda can initialize ssp correctly!)
| |
| − | refer to details below
| |
| − |
| |
| − | </pre>
| |
| − |
| |
| − | <pre>
| |
| − | desktop tunl11, user solid and root
| |
| − | crate sbsvme22, user daq and root
| |
| − | ask password from Zhiwen or Alex
| |
| − |
| |
| − | to start x11vnc at tunl11 localhost:0, run ~/myvnc_0 as root
| |
| − |
| |
| − | LED275W anode should connect to coaxil cable core, cathod should connect to coaxil cable skin
| |
| − | This way it can driven by a postive charge
| |
| − |
| |
| − | function generator controllering LED is set with 1kHz 5ns width positive pulse at output1
| |
| − | If the light at output1 is off, turn it on by press "shift",then "utput1"
| |
| − |
| |
| − | OM4 optical cables from fibercablesdirect.com has 12 ends
| |
| − | The pairing are L-R or Yellow-White: 1-12,2-11,3-10,4-9, while 4 others are unused.
| |
| − | Other company may do it differently
| |
| − |
| |
| − | To control the Lecroy HV power supply
| |
| − | switch its power on at back of crate, turn the turn key at front of crate to position "remote" and
| |
| − | wait for display "remote" stable
| |
| − | connect it to USB port at the back of tunl11 using the blue network to USB converter
| |
| − | check if /dev/ttyUSB0 exist
| |
| − | run "minicom" as root, then type return, type 1450, type vt100
| |
| − | see help manual on right side, set target V and enable channel by "[", power on by "{" or or use "h" for help and "q" to quit help
| |
| − | Only one "minicom" can be alive, to run another in other terminal, kill existing one first
| |
| − |
| |
| − | keysight E336313A LV power supply
| |
| − | 4.5-5.5V and 0.9A need for each board
| |
| − | 840mA is typically once they fully boot and run, but you definitely want a bit of margin otherwise it can trip during startup and be in an endless startup oscillation
| |
| − |
| |
| − | ssp runs with 125Mhz clock at right side of vxs crate, fadc run at 250Mhz at left side of crate
| |
| − |
| |
| − | To check ticard, run "tiint" at sbsvme22
| |
| − |
| |
| − | MAPMT test with LED, both maroc pixel and sum by fadc
| |
| − | crate 1 has fadc in slot 3 and ssp in slot 15
| |
| − | 15 pmts and 5 fibers 0 - 4
| |
| − |
| |
| − | </pre>
| |
| − |
| |
| − | === coda data taking ===
| |
| − |
| |
| − | both solid@tunl11 and daq@sbsvme22 use tunl11:/home/solid/.tcshrc for coda env setup, don't change it
| |
| − |
| |
| − | As solid@tunl11, you can login daq@sbsvme22 without password
| |
| − |
| |
| − | start coda
| |
| − | as solid@tunl11
| |
| − | > vncserver (start vnc)
| |
| − | > vncviewer localhost :1 & (login with same password of user solid)
| |
| − | inside vnc
| |
| − | > kcoda
| |
| − | > startCoda
| |
| − |
| |
| − | config coda
| |
| − | coda config is at daq@sbsvme22:git/rol
| |
| − | >> Changing the FADC configuration file
| |
| − | *Login to daq@sbsvme22
| |
| − | * Go to directory git/rol/config
| |
| − | * Edit "fadc250.cnf" file
| |
| − | * Once edited, compile from it from directory : git/rol by command (make -B)
| |
| − | * To see the change in CODA, reset the coda (NOT JUST THE PRESTART)
| |
| − | >> List file is at :git/rol/solidhgc_list.c
| |
| − | * To have the prescaled enabled tiSetInputPrescale(input, prescale), where input=1 (TS#1)
| |
| − | * prescale value = 2^(ps -1) +1 , where ps is prescale setting
| |
| − | >> Once the file is changed, compile it (make -B) and prestart the coda
| |
| − |
| |
| − | debug code
| |
| − | If the crate is down,the xterms should have remained up while the crates were down
| |
| − | If they are closed, just start them up again.
| |
| − | If you think the ROCs need restarted: "restartStuff" as solid@tunl11
| |
| − | The xterms for the ROCS and PEB should remain up until you kcoda. refer to https://github.com/JeffersonLab/coda_scripts
| |
| − |
| |
| − | when coda running, the processes below are present
| |
| − | <pre>
| |
| − | [daq@sbsvme22 ~]$ ps -ef | grep coda
| |
| − | daq 5911 5893 0 12:40 pts/0 00:00:00 /bin/bash /home/daq/coda_scripts/startROC.sh ROC1
| |
| − | daq 5913 5911 99 12:40 pts/0 01:13:25 coda_roc -i -v -name ROC1 -session solidhgc
| |
| − | [solid@tunl11 ~]$ ps -ef | grep coda
| |
| − | solid 8423 8390 0 12:45 pts/17 00:00:00 /bin/bash /home/solid/coda_scripts/startPEB.sh
| |
| − | solid 8428 8423 0 12:45 pts/17 00:00:00 /bin/csh -f /home/solid/coda3/3.10/Linux-x86_64/bin/coda_emu_peb PEB1
| |
| − | solid 8430 8428 1 12:45 pts/17 00:00:44 /home/solid/jdk1.8.0_152/bin/java -cp /home/solid/coda3/3.10/common/jar/* -XX:+PerfDisableSharedMem -XX:+UseG1GC -Djava.net.preferIPv4Stack=true -Djava.library.path=/home/solid/coda3/3.10/Linux-x86_64/lib -DcmsgUDL=rc://multicast/solidhgc -Dname=PEB1 -Dtype=PEB org.jlab.coda.emu.EmuFactory
| |
| − | solid 19258 3339 0 13:51 pts/2 00:00:00 grep --color=auto coda
| |
| − | solid 31228 31221 0 12:06 pts/14 00:00:00 /bin/csh -f /home/solid/coda3/3.10/Linux-x86_64/bin/platform
| |
| − | solid 31231 31228 2 12:06 pts/14 00:02:50 /home/solid/jdk1.8.0_152/bin/java -Xms200m -Xmx2048m -XX:-UseConcMarkSweepGC -Djava.net.preferIPv4Stack=true org.jlab.coda.afecs.platform.APlatform
| |
| − | solid 31291 1 0 12:06 pts/15 00:00:00 /bin/csh -f /home/solid/coda3/3.10/Linux-x86_64/bin/rcgui
| |
| − | solid 31296 31291 44 12:06 pts/15 00:47:26 /home/solid/jdk1.8.0_152/bin/java -Xms200m -Xmx500m -Dprism.order=sw -Dsun.java2d.pmoffscreen=false -Djava.net.preferIPv4Stack=true org.jlab.coda.afecs.ui.rcgui.RcGuiApplication
| |
| − | solid 31315 31297 0 12:06 pts/12 00:00:00 /bin/bash /home/solid/coda_scripts/remote_vme tunl11 nobody startPEB.sh
| |
| − | solid 31328 31310 0 12:06 pts/16 00:00:00 /bin/bash /home/solid/coda_scripts/remote_vme sbsvme22 nobody startROC.sh ROC1
| |
| − | </pre>
| |
| − |
| |
| − | === coda data analysis ===
| |
| − |
| |
| − | [[solid_cc_readout_benchtest_coda_runlog]]
| |
| − |
| |
| − | info
| |
| − | in evio, fadc tag=3, ssp tag=18
| |
| − | maroc sum has sum signal of fadc value as it is, but quad fadc signal needs 4095-fadc, this is like MAPMT simple sum readout
| |
| − |
| |
| − | coda output location tunl11:/home/solid/data
| |
| − |
| |
| − | evio on ifarm /work/halla/solid/cc_pro/benchtest/coda/data
| |
| − |
| |
| − | evio on ifarm /work/halla/solid/cc_pro/benchtest/coda/root
| |
| − |
| |
| − | plot on web https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/benchtest/coda
| |
| − |
| |
| − | how to use decoder and do fadc analysis
| |
| − | <pre>
| |
| − | latest
| |
| − | cd /work/halla/solid/cc_pro/fadc_decoder-revamp_latest
| |
| − | source /work/hallb/prad/apps/set_env_CUE_modern.csh
| |
| − | source env/setup_env.csh
| |
| − | build/src/analyze -m database/modules/mapmt_maroc_bench_20200903.json ../benchtest/coda/data/solidhgc_73.evio.0 ../benchtest/coda/root/solidhgc_73.root
| |
| − |
| |
| − | old
| |
| − | cd /work/halla/solid/cc_pro/fadc_decoder-revamp
| |
| − | source /work/hallb/prad/apps/set_env_CUE_modern.csh
| |
| − | source env/setup_env.csh
| |
| − | build/src/analyze --config-module="config/mapmt_maroc_bench_20200903.conf" -c 1 ../benchtest/coda/data/solidhgc_73.evio.0 ../benchtest/coda/root/solidhgc_73.root
| |
| − |
| |
| − | make raw fadc plot
| |
| − | python scripts/draw_events.py ../benchtest/root/solidhgc_73.root MAPMT_SUMS -o plots/run73 -e 100,200
| |
| − | python scripts/draw_events.py ../benchtest/root/solidhgc_73.root MAPMT_QUADS -o plots/run73 -e 100,200
| |
| − |
| |
| − | compile
| |
| − | cd /work/halla/solid/cc_pro/
| |
| − | git clone https://eicweb.phy.anl.gov/cherenkov/fadc_decoder.git fadc_decoder-revamp_latest
| |
| − | cd fadc_decoder-revamp_latest
| |
| − | git checkout revamp
| |
| − | source /work/hallb/prad/apps/set_env_CUE_modern.csh
| |
| − | source env/setup_env.csh
| |
| − | mkdir build && cd build
| |
| − | cmake ..
| |
| − | make -j8
| |
| − |
| |
| − | </pre>
| |
| − |
| |
| − | Oldold
| |
| − | <pre>
| |
| − | cp -rpv /w/hallb-scifs17exp/general/prad/jz/hgc/decoder/fadc_decoder /work/halla/solid/cc_pro
| |
| − | cd fadc_decoder
| |
| − | source /work/hallb/prad/apps/set_env_CUE_modern.csh
| |
| − | source env/setup_env.csh
| |
| − | rm -rf build
| |
| − | mkdir build && cd build
| |
| − | cmake ..
| |
| − | make -j4
| |
| − | build/src/analyze ../test_esb/data/solidhgc_67.evio.0 ../test_esb/root/solidhgc_67.root
| |
| − |
| |
| − |
| |
| − | source /work/hallb/prad/apps/set_env_CUE_modern.csh
| |
| − | git clone https://eicweb.phy.anl.gov/cherenkov/fadc_decoder.git
| |
| − | cd fadc_decoder/
| |
| − | git checkout revamp
| |
| − | mkdir build && cd build
| |
| − | cmake ..
| |
| − | make
| |
| − | cd ..
| |
| − | ./build/ssp/ssp_analyze /w/hallb-scifs17exp/general/prad/jz/fadc_decoder-master/solidhgc_50.evio.0 solidhgc_50.root
| |
| − | </pre>
| |
| − |
| |
| − | maroc analysis
| |
| − |
| |
| − | root -b -q 'mRICH_reco.C("/w/halla-scifs17exp/solid/cc_pro/fadc_decoder/solidhgc_67.root" )'
| |
| − |
| |
| − | === maroc scaler data taking and analysis ===
| |
| − |
| |
| − | [[solid_cc_readout_benchtest_scaler_runlog]]
| |
| − |
| |
| − | <pre>
| |
| − |
| |
| − | refer to
| |
| − | https://clasweb.jlab.org/wiki/images/7/7a/Instructions_Pedestal-Dark.txt
| |
| − | /usr/clas12/release/1.4.0/parms/ssp/rich4.cnf
| |
| − |
| |
| − | ** take scalar data at sbsvme22 ********************
| |
| − | ssh root@sbsvme22
| |
| − |
| |
| − | #check if three dir is mounted from tunl11
| |
| − | ps -ef |grep sshfs
| |
| − | #mount them if needed, for example, after either sbsvme22 or tunl11 reboot
| |
| − | Type : $/home/mysshfs
| |
| − | If previously system has been rebooted then you probably need to unmount the directories first
| |
| − | For this type: umount -l YOUR_MNT_DIR
| |
| − |
| |
| − | #set env
| |
| − | source /usr/clas12/release/1.4.0/setup
| |
| − | setenv RICH_SUITE /home/clasrun/rich/suite1.0
| |
| − |
| |
| − | cd $RICH_SUITE/sw/daq
| |
| − |
| |
| − | #check connection, this will turn on green lights on ssp board for each connected fiber
| |
| − | ssptest_ConfigureAll 230 64 0
| |
| − | (it will create setup.txt in its running dir)
| |
| − |
| |
| − | #to check light leak, turn HV on at -1kV, then run
| |
| − | ./check_lightleak.sh 300 64 | grep -A15 Counting
| |
| − | (the resulting rate per pixel should be 100-200Hz at used threshold 300 when there is no lightleak)
| |
| − |
| |
| − | # scan with constant gain
| |
| − | ssptest_ConfigureAll 230 64 0
| |
| − | ./thr_scan.sh 170 220 64 #ped scan
| |
| − | ./thr_scan.sh 150 650 64 #dark scan
| |
| − |
| |
| − | # scan with gain map at $RICH_SUITE/maps/gain.txt
| |
| − | ssptest_ConfigureAll 230 0 0
| |
| − | ./thr_scan.sh 170 220 0 #ped scan
| |
| − | ./thr_scan.sh 150 650 0 #dark scan
| |
| − |
| |
| − | edit thr_scan.sh to change scan step size if needed
| |
| − |
| |
| − | #change and compile code
| |
| − | cd /usr/clas12/release/1.4.0/coda/src/rol
| |
| − | edit /usr/clas12/release/1.4.0/coda/src/rol/main/ssptest_ConfigureAll.c
| |
| − | edit /usr/clas12/release/1.4.0/coda/src/rol/main/ssptest_ScalerAll.c
| |
| − | edit /usr/clas12/release/1.4.0/coda/src/rol/main/ssptest_ScalerAll_loop.c
| |
| − | (put all other source code in dir tmp, otherwise they will be recompiled also)
| |
| − | cd /usr/clas12/release/1.4.0/coda/src/rol
| |
| − | make -j4
| |
| − | make install
| |
| − |
| |
| − | ** analyze data at tunl11 ********************
| |
| − | source /apps/root/5.34.36/setroot_CUE.csh
| |
| − | setenv RICH_SUITE /home/clasrun/rich/suite1.0
| |
| − |
| |
| − | The main code is at $RICH_SUITE/sw/ana/lib/rich.C
| |
| − |
| |
| − | cd $RICH_SUITE/sw/ana/ped
| |
| − | ./recoPed.sh ../../../data/ped/rich_pedestal_20200814_140522.txt 0 #for ped run
| |
| − | ./recoPed.sh ../../../data/ped/rich_pedestal_20200814_191511.txt 1 #for dark run
| |
| − |
| |
| − | see results at $RICH_SUITE/results/scalers
| |
| − | and https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/benchtest/scalers/
| |
| − |
| |
| − | clas12 rich result example
| |
| − | https://hallaweb.jlab.org/12GeV/SoLID/download/cc_pro/benchtest/scalers/
| |
| − | /200730_063821
| |
| − |
| |
| − | === setup maroc scaler at desktop tunl11 and vxs crate sbsvme22==========================
| |
| − |
| |
| − | make a copy of clas12 coda code at tunl11
| |
| − | then mount this copy from tunl11 onto sbsvme22 using sshfs, because sbsvme22 has very limit disk size
| |
| − |
| |
| − | ** at tunl11 as user solid **********
| |
| − |
| |
| − | at clasrun@clondaq6
| |
| − | tar zcfv clas12_1.4.0_coda.tgz /usr/clas12/release/1.4.0/coda
| |
| − | tar zcfv clas12_1.4.0_clon.tgz /usr/clas12/release/1.4.0/clon
| |
| − | tar zcfv clas12_1.4.0_parms.tgz /usr/clas12/release/1.4.0/parms
| |
| − | scp to tunl11 and extract at /usr/clas12/release/1.4.0/
| |
| − |
| |
| − | at clasrun@clondaq6
| |
| − | tar zcfv activemq.tgz /usr/local/activemq
| |
| − | scp to tunl11 and extract at /usr/local/activemq
| |
| − |
| |
| − | at clasrun@clondaq6
| |
| − | tar zcfv gcc_8.3.0.tgz /apps/gcc/8.3.0
| |
| − | scp to tunl11 and extract at /home/clasrun/apps/gcc/8.3.0
| |
| − |
| |
| − | at clasrun@clondaq6
| |
| − | scp /usr/clas12/release/1.4.0/.setup solid@tunl11:/usr/clas12/release/1.4.0/
| |
| − | cp .setup setup
| |
| − | edit "setup" to have new gcc and root location
| |
| − |
| |
| − | at clasrun@rich4
| |
| − | tar zcfv rich_1.0.tgz --exclude='results/*' rich/suite1.0
| |
| − | scp to tunl11 and extract at /home/clasrun/rich/suite1.0
| |
| − |
| |
| − | ** at sbsvme22 as user root **************************
| |
| − |
| |
| − | /home/mysshfs #mount file from tunl11 like the following
| |
| − | sshfs solid@tunl11:/usr/clas12/release/1.4.0 /usr/clas12/release/1.4.0
| |
| − | sshfs solid@tunl11:/usr/local/activemq /usr/local/activemq
| |
| − | sshfs solid@tunl11:/home/clasrun /home/clasrun
| |
| − |
| |
| − | To match latest activemq 3.9.5
| |
| − | donwload and install the following from https://yum.jasonlitka.com/EL5/i386/
| |
| − | apr-1.3.12-1.jason.1.i386.rpm
| |
| − | apr-devel-1.3.12-1.jason.1.i386.rpm
| |
| − | apr-util-1.3.12-1.jason.1.i386.rpm
| |
| − |
| |
| − | cd /usr/clas12/release/1.4.0/coda/src
| |
| − | edit /usr/clas12/release/1.4.0/coda/src/Makefile.include to use this gcc
| |
| − | ifeq ("$(OSTYPE_PLATFORM)","Linux_i686")
| |
| − | CC = /home/clasrun/apps/gcc/8.3.0/bin/gcc
| |
| − | CXX = /home/clasrun/apps/gcc/8.3.0/bin/g++
| |
| − | SHLD = $(CXX) -shared -g
| |
| − |
| |
| − | </pre>
| |
| − |
| |
| − | = other info =
| |
| − |
| |
| − | == CLAS12 RICH rate ==
| |
| − |
| |
| − | 2khz/pixel rate average in one PMT with beam, shown in Fig 29 of https://clasweb.jlab.org/12gev/nims/rich-nim.pdf
| |
| − |
| |
| − | from Marco Mirazita
| |
| − | studies as a function of the beam current have been done in the past, see for example this log entry: https://logbooks.jlab.org/entry/3520614
| |
| − | The scalers are linear up to 200 nA beam current, rates of the order of few kHz for normal PMTs. All these plots are done with average rates per MAPMT. We have few channels with dark noise at level of MHz, and still the scalers look linear. hot PMT 344 show max 16kHz at p345 of https://www.jlab.org/Hall-B/secure/clas12/RICH/mirazita/EngRunData/BeamCurrentScan/PlotBeamCurrentData.pdf
| |
| − |
| |
| − | from Valery Kubarovsky
| |
| − | https://logbooks.jlab.org/entry/3836244 We tested RICH per pixel rate upto 5 kHz, 320 kHz per PMT. It is still linear.
| |
| − |
| |
| − | from Ben
| |
| − | https://clasweb.jlab.org/wiki/images/7/76/JUNE2015_RICH_Review_FPGAboard.pdf page 9, RICH daq only goes to 50kHz trigger rate, it assumes 25k pixels in 1 crate with 1Gbps ethernet readout. So for you to get the livetime you'll have to determine the occupancy curve. 300kHz pixel rate - let's say for fun you have a 200ns window (which is narrow, but probably reasonably possible), then you have an occupancy of 6% - the magenta curve which doesn't look good as it approaches 100kHz! I'd have to rescale it for however many channels your system has.
| |
| − | 1) The per channel rate limit with no readout per pixel is ~4MHz (thats a firmware limit - could be larger if needed, not saying anything about PMT life, pile-up efficiency, etc)
| |
| − | 2) The next limit is basically triggered readout - the number of hits readout has to fit onto 1GbE readout per crate (8bytes per hit * event rate * occupancy * #ch < 125MB/s) - an it really needs some margin, assuming 100MB/s is more reasonable
| |
| − | 3) I'm pretty sure we'll be using the VTP for readout by this time, that will allow getting close to 10GbE readout from each crate (using VXS lines instead of VME, so the backplane should give at least 200MB/s from each slot in parallel to each VTP)
| |
| − | 4) 30ns is plausible for timing coincidence (~16ns needed just for MAROC shaping), then whatever the trigger sampling jitter, particle TOF skew, and readout channel skew need to be added
| |
| − |
| |
| − | == ssp decoding info ==
| |
| − |
| |
| − | For the SoLID Cerenkov test in HallC, maroc electronics will be read out
| |
| − | by ssp which can be recorded by coda into evio file
| |
| − |
| |
| − | For GEM in HallA/C, it will be readout by ssp also
| |
| − |
| |
| − | If we use analyzer to read evio, we would need to make it read ssp bank.
| |
| − |
| |
| − | Then interpret its content of maroc or GEM separately.
| |
| − |
| |
| − | general info
| |
| − | * clas12 rich wiki https://clasweb.jlab.org/wiki/index.php/Clas12_RICH
| |
| − | * clas12 rich NIM paper https://clasweb.jlab.org/12gev/nims/?C=M;O=D
| |
| − | * gluex dirc https://halldweb.jlab.org/wiki/index.php/DIRC
| |
| − |
| |
| − | code
| |
| − |
| |
| − | * c++ example from Danning Di
| |
| − | ** code to read evio file for GEM detector
| |
| − | ** sample evio file
| |
| − |
| |
| − | * example from hall D
| |
| − | ** C++ code in DANA/JANA to read the SSP data from evio file for DIRC detector https://github.com/JeffersonLab/halld_recon/blob/master/src/libraries/DAQ/DEVIOWorkerThread.cc#L2130
| |
| − | ** sample evio file /work/halla/solid/cc_pro/hd_rawdata_071507_012.DIRC-LED.evio
| |
| − | ** ssp data bank structure for DIRC [[File:DIRC_SSPDataFormat.pdf]]
| |
| − |
| |
| − | * example from clas12
| |
| − | ** java code to read ssp data bank from evio file for RICH detector and covert to hipo file https://github.com/JeffersonLab/clas12-offline-software/tree/development/common-tools/clas-detector/src/main/java/org/jlab/detector/decode
| |
| − | ** java reconstruction code in coatjava/CLARA to analyze ssp data bank in hipo file https://github.com/JeffersonLab/clas12-offline-software/tree/development/reconstruction/rich/src/main/java/org/jlab/rec/rich
| |
| − | ** calibration
| |
| − | *** manual https://clasweb.jlab.org/wiki/images/4/41/RichTimeCalibration_Manual-03-02-2020.pdf
| |
| − | *** code https://github.com/JeffersonLab/clas12calibration-rich/tree/master/richTimeCalib
| |
| − | *** hipo4 needed https://github.com/gavalian/hipo
| |
| − | *** test hipo4 file /cache/clas12/rg-b/production/recon/pass0/v21.8.1/mon/recon/
| |
| − |
| |
| − | * example from mRICH of EIC
| |
| − | ** /work/halla/solid/cc_pro/maroc_mirazita
| |
