Cc readout benchtest coda runlog
From solidwiki
HV 98fc_850V all threshold 230, all gain 64 LED 4.4V 9.38ns 10Hz ch 16 is trigger run note 67 PMT1,2,3 69 PMT1,2,3 change SSP_RICH_W_WIDTH from 400 to 2000 70 PMT4,5,6 72 PMT4,5,6 change SSP_RICH_W_WIDTH from 2000 to 400 73 PMT7,8,9 74 PMT10,11,12 75 PMT13,14,15 76 PMT1,2,3 LED change from 4.4V to 3.5V 77 PMT1,2,3 LED change to 4.0V 78 PMT1,2,3 LED change to 4.3V 80 PMT1,2,3 LED change to 5.0V 81 PMT1,2,3 LED change to 4.4V 15k events 82 PMT1,2,3 LED change to 4.4V 33k events 84 PMT1,2,3 change from ssp.cnf_thr230_gain64 to ssp.cnf_thrHV98fC850V_gainmap 86 PMT1,2,3 change from small to big LV cable 87 PMT1,2,3 88 PMT1,2,3 91 PMT1,2,3 add grounding wire 92 PMT7,2,3 94 PMT1,2,3 FADC250_CH_DAC from 500 to 600 for quad of PMT2,3 95 PMT1,2,3 FADC250_CH_DAC from 600 to 400 for quad of PMT2,3 98 PMT1,2,3 FADC250_CH_DAC from 500 to 300 for quad of PMT1 100 PMT1,2,3 FADC250_CH_DAC from 400 to 1000 for quad of PMT2,3 104 PMT1,2,3 FADC250_CH_DAC from 400 to 1000 for quad of PMT2,3 106 PMT1,2,3 131 PMT1,2,3 moved from ESB to testlab, FADC250_CH_DAC quad 500 and sum 3000, use small LV cable with ground cable, board 7 and fiber 4 has no LV 132 PMT1,2,3 28k events 133 PMT1,2,3 use small LV cable without ground cable 134 PMT1,2,3 use small LV cable with ground cable 139 PMT1,2,3 LED change to 4.42V, use small LV cable with ground cable 140 PMT1,2,3 LED change to 4.45V, use small LV cable with ground cable 141 PMT1,2,3 LED change to 4.48V, use small LV cable with ground cable 142 PMT1,2,3 LED change to 4.52V, use small LV cable with ground cable 143 PMT1,2,3 LED change to 4.56V, use small LV cable with ground cable 144 PMT1,2,3 LED change to 4.60V, use small LV cable with ground cable 145 PMT1,2,3 LED change to 4.65V, use small LV cable with ground cable 147 PMT1,2,3 No LED, use small LV cable with ground cable 148 PMT1,2,3 No LED, HV changed from "HV98fc-850V" to "HV147fc-900V" 149 PMT1,2,3 No LED, Rate 100 Hz (interval 10 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 150 PMT1,2,3 No LED, Rate 1000 Hz (interval 0.10 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 151 PMT1,2,3 No LED, Rate 10 KHz (interval 0.10 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 152 PMT1,2,3 LED 4.4 V , Rate 10 Hz (interval 100 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 153 5 FADC board JUNK LED 4.4 V , PMT HV "HV147fc-900V" 154 5 FADC board JUNK LED 4.4 V , PMT HV "HV147fc-950V" 155 5 FADC board JUNK (LED 4.4 V , PMT HV "HV147fc-1000V" 156 5 FADC board LED 4.4 V , Rate 10 Hz (interval 100 ms), Only one pixel PMT HV "HV147fc-850V" 200 5 FADC board LED 4.4 V , Rate 100 Hz (interval 10 ms), PMT HV "HV147fc-850V" 201 5 FADC board LED 4.4 V , Rate 1 kHz (interval 1 ms), PMT HV "HV147fc-850V" 202 5 FADC board LED 4.4 V , Rate 10 kHz (interval 0.10 ms), PMT HV "HV147fc-850V" 203 5 FADC board LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-900V" 204 5 FADC board LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-950V" 236 123 in slot4 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 237 123 in slot5 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 238 123 in slot6 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 239 123 in slot7 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 280 5 FADC Buffer level=5 block level=4 rate =10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 281 5 FADC Buffer level=5 block level=4 rate =100 Hz (interval 10 ms), PMT HV "HV147fc-850V" 282 5 FADC Buffer level=5 block level=4 rate =1 kHz (interval 1 ms), PMT HV "HV147fc-850V" 283 5 FADC Buffer level=5 block level=4 rate =7.5 kHz (interval 100 us), PMT HV "HV147fc-850V" 284 5 FADC Buffer level=5 block level=4 rate =7.5 kHz (interval 10 us), PMT HV "HV147fc-850V" 318 4 FADC Buffer level=5 block level=4 rate =10 kHz + inverted signal (interval 100 us), PMT HV "HV147fc-850V" 334 4 FADC Pedestal + 100 (Above thersh) rate =14.3 kHz + inverted signal (interval 70 us), PMT HV "HV147fc-850V" 335 4 FADC Pedestal + 100 (Above thersh) rate =16.6 kHz + inverted signal (interval 60 us), PMT HV "HV147fc-850V" 336 4 FADC Pedestal + 100 (Above thersh) rate =17.5 kHz + inverted signal (interval 50 us), PMT HV "HV147fc-850V" 339 4 FADC Pedestal + 200 (Above thersh) rate =saturated + inverted signal (interval 10 us), PMT HV "HV147fc-850V" 382 4 FADC Pedestal + 20 (Above thersh) ps=4 (9) + inverted signal Buffer=4,block=4 (interval 10 us), PMT HV "HV147fc-850V" 384 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 100 ms), PMT HV "HV147fc-850V" 385 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 10 ms), PMT HV "HV147fc-850V" 386 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-850V" 387 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 100 us), PMT HV "HV147fc-850V" 388 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 70 us), PMT HV "HV147fc-850V" 389 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 60 us), PMT HV "HV147fc-850V" 390 4 FADC Pedestal + 20 (Above thersh) ps=1 (2) + inverted signal Buffer=4,block=4 (interval 50 us), PMT HV "HV147fc-850V" 392 4 FADC Pedestal + 20 (Above thersh) ps=2 (3) + inverted signal Buffer=4,block=4 (interval 20 us), PMT HV "HV147fc-850V" 398 4 FADC Pedestal + 50 (Above thersh) ps=4 (9) + inverted signal Buffer=4,block=4 (interval 10 us), PMT HV "HV147fc-850V" 399 4 FADC Pedestal + 50 (Above thersh) ps=5 (17) + inverted signal Buffer=4,block=4 (interval 5 us), PMT HV "HV147fc-850V" 400 4 FADC Pedestal + 50 (Above thersh) ps=6 (33) + inverted signal Buffer=4,block=4 (interval 3 us), PMT HV "HV147fc-850V" 401 4 FADC Pedestal + 50 (Above thersh) ps=6 (33) + inverted signal Buffer=4,block=4 (interval 2 us), PMT HV "HV147fc-850V" 402 4 FADC Pedestal + 50 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 403 4 FADC Pedestal + 80 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 404 4 FADC Pedestal + 100 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 405 4 FADC Pedestal + 150 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 406 4 FADC Pedestal + 200 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 407 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-1000V" 408 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-1050V" 409 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-950V" 410 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-900V" ===== LASER RUNS =====PMT at asic 0, LV 5.35V, HV 900v 569 FADC 200 ns + Laser 1MHz (ps=65 saturated) + coda rate (7 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 572 FADC 200 ns + Laser 500 kHz (ps=129) + coda rate (~4 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 573 FADC 200 ns + Laser 1MHz (ps=129 saturated) + coda rate (7 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 574 FADC 200 ns + Laser 1MHz (ps=257) + coda rate (~4 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 575 FADC 200 ns + Laser 200 kHz (ps=33) + coda rate (~6 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 576 FADC 200 ns + Laser 100 kHz (ps=17) + coda rate (~6 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 577 FADC 200 ns + Laser 100 kHz (ps=17) + coda rate (~6 kHz) + tune 50%, wheel3 + ssp gain (gain "ssp850Vgainmap" 610 FADC 200 ns + Laser 1Mz (ps=257) + LED at 2.3 V coda rate (~ 3.8kHz) + tune 50%, wheel2 + ssp gain (gain "sspLowergainmap"+ PED + TET 50 612 FADC 200 ns + Laser 1Mz (ps=257) + LED at 2.3 V coda rate (~ 3.8kHz) + tune 50%, wheel2 + ssp gain (gain "sspLowergainmap" PED + TET 100
