Cc readout benchtest coda runlog
From solidwiki
HV 98fc_850V all threshold 230, all gain 64 LED 4.4V 9.38ns 10Hz ch 16 is trigger run note 67 PMT1,2,3 69 PMT1,2,3 change SSP_RICH_W_WIDTH from 400 to 2000 70 PMT4,5,6 72 PMT4,5,6 change SSP_RICH_W_WIDTH from 2000 to 400 73 PMT7,8,9 74 PMT10,11,12 75 PMT13,14,15 76 PMT1,2,3 LED change from 4.4V to 3.5V 77 PMT1,2,3 LED change to 4.0V 78 PMT1,2,3 LED change to 4.3V 80 PMT1,2,3 LED change to 5.0V 81 PMT1,2,3 LED change to 4.4V 15k events 82 PMT1,2,3 LED change to 4.4V 33k events 84 PMT1,2,3 change from ssp.cnf_thr230_gain64 to ssp.cnf_thrHV98fC850V_gainmap 86 PMT1,2,3 change from small to big LV cable 87 PMT1,2,3 88 PMT1,2,3 91 PMT1,2,3 add grounding wire 92 PMT7,2,3 94 PMT1,2,3 FADC250_CH_DAC from 500 to 600 for quad of PMT2,3 95 PMT1,2,3 FADC250_CH_DAC from 600 to 400 for quad of PMT2,3 98 PMT1,2,3 FADC250_CH_DAC from 500 to 300 for quad of PMT1 100 PMT1,2,3 FADC250_CH_DAC from 400 to 1000 for quad of PMT2,3 104 PMT1,2,3 FADC250_CH_DAC from 400 to 1000 for quad of PMT2,3 106 PMT1,2,3 131 PMT1,2,3 moved from ESB to testlab, FADC250_CH_DAC quad 500 and sum 3000, use small LV cable with ground cable, board 7 and fiber 4 has no LV 132 PMT1,2,3 28k events 133 PMT1,2,3 use small LV cable without ground cable 134 PMT1,2,3 use small LV cable with ground cable 139 PMT1,2,3 LED change to 4.42V, use small LV cable with ground cable 140 PMT1,2,3 LED change to 4.45V, use small LV cable with ground cable 141 PMT1,2,3 LED change to 4.48V, use small LV cable with ground cable 142 PMT1,2,3 LED change to 4.52V, use small LV cable with ground cable 143 PMT1,2,3 LED change to 4.56V, use small LV cable with ground cable 144 PMT1,2,3 LED change to 4.60V, use small LV cable with ground cable 145 PMT1,2,3 LED change to 4.65V, use small LV cable with ground cable 147 PMT1,2,3 No LED, use small LV cable with ground cable 148 PMT1,2,3 No LED, HV changed from "HV98fc-850V" to "HV147fc-900V" 149 PMT1,2,3 No LED, Rate 100 Hz (interval 10 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 150 PMT1,2,3 No LED, Rate 1000 Hz (interval 0.10 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 151 PMT1,2,3 No LED, Rate 10 KHz (interval 0.10 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 152 PMT1,2,3 LED 4.4 V , Rate 10 Hz (interval 100 ms), HV changed from "HV98fc-850V" to "HV147fc-900V" 153 5 FADC board JUNK LED 4.4 V , PMT HV "HV147fc-900V" 154 5 FADC board JUNK LED 4.4 V , PMT HV "HV147fc-950V" 155 5 FADC board JUNK (LED 4.4 V , PMT HV "HV147fc-1000V" 156 5 FADC board LED 4.4 V , Rate 10 Hz (interval 100 ms), Only one pixel PMT HV "HV147fc-850V" 200 5 FADC board LED 4.4 V , Rate 100 Hz (interval 10 ms), PMT HV "HV147fc-850V" 201 5 FADC board LED 4.4 V , Rate 1 kHz (interval 1 ms), PMT HV "HV147fc-850V" 202 5 FADC board LED 4.4 V , Rate 10 kHz (interval 0.10 ms), PMT HV "HV147fc-850V" 203 5 FADC board LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-900V" 204 5 FADC board LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-950V" 236 123 in slot4 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 237 123 in slot5 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 238 123 in slot6 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 239 123 in slot7 LED 4.4 V , Rate 10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 280 5 FADC Buffer level=5 block level=4 rate =10 Hz (interval 100 ms), PMT HV "HV147fc-850V" 281 5 FADC Buffer level=5 block level=4 rate =100 Hz (interval 10 ms), PMT HV "HV147fc-850V" 282 5 FADC Buffer level=5 block level=4 rate =1 kHz (interval 1 ms), PMT HV "HV147fc-850V" 283 5 FADC Buffer level=5 block level=4 rate =7.5 kHz (interval 100 us), PMT HV "HV147fc-850V" 284 5 FADC Buffer level=5 block level=4 rate =7.5 kHz (interval 10 us), PMT HV "HV147fc-850V" 318 4 FADC Buffer level=5 block level=4 rate =10 kHz + inverted signal (interval 100 us), PMT HV "HV147fc-850V" 334 4 FADC Pedestal + 100 (Above thersh) rate =14.3 kHz + inverted signal (interval 70 us), PMT HV "HV147fc-850V" 335 4 FADC Pedestal + 100 (Above thersh) rate =16.6 kHz + inverted signal (interval 60 us), PMT HV "HV147fc-850V" 336 4 FADC Pedestal + 100 (Above thersh) rate =17.5 kHz + inverted signal (interval 50 us), PMT HV "HV147fc-850V" 339 4 FADC Pedestal + 200 (Above thersh) rate =saturated + inverted signal (interval 10 us), PMT HV "HV147fc-850V" 382 4 FADC Pedestal + 20 (Above thersh) ps=4 (9) + inverted signal Buffer=4,block=4 (interval 10 us), PMT HV "HV147fc-850V" 384 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 100 ms), PMT HV "HV147fc-850V" 385 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 10 ms), PMT HV "HV147fc-850V" 386 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-850V" 387 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 100 us), PMT HV "HV147fc-850V" 388 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 70 us), PMT HV "HV147fc-850V" 389 4 FADC Pedestal + 20 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 60 us), PMT HV "HV147fc-850V" 390 4 FADC Pedestal + 20 (Above thersh) ps=1 (2) + inverted signal Buffer=4,block=4 (interval 50 us), PMT HV "HV147fc-850V" 392 4 FADC Pedestal + 20 (Above thersh) ps=2 (3) + inverted signal Buffer=4,block=4 (interval 20 us), PMT HV "HV147fc-850V" 398 4 FADC Pedestal + 50 (Above thersh) ps=4 (9) + inverted signal Buffer=4,block=4 (interval 10 us), PMT HV "HV147fc-850V" 399 4 FADC Pedestal + 50 (Above thersh) ps=5 (17) + inverted signal Buffer=4,block=4 (interval 5 us), PMT HV "HV147fc-850V" 400 4 FADC Pedestal + 50 (Above thersh) ps=6 (33) + inverted signal Buffer=4,block=4 (interval 3 us), PMT HV "HV147fc-850V" 401 4 FADC Pedestal + 50 (Above thersh) ps=6 (33) + inverted signal Buffer=4,block=4 (interval 2 us), PMT HV "HV147fc-850V" 402 4 FADC Pedestal + 50 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 403 4 FADC Pedestal + 80 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 404 4 FADC Pedestal + 100 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 405 4 FADC Pedestal + 150 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 406 4 FADC Pedestal + 200 (Above thersh) ps=7 (65) + inverted signal Buffer=4,block=4 (interval 1 us), PMT HV "HV147fc-850V" 407 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-1000V" 408 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-1050V" 409 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-950V" 410 4 FADC Pedestal + 50 (Above thersh) ps=0 (1) + inverted signal Buffer=4,block=4 (interval 1 ms), PMT HV "HV147fc-900V" ===== LASER RUNS =====PMT at asic 0, LV 5.35V, HV 900v 569 FADC 200 ns + Laser 1MHz (ps=65 saturated) + coda rate (7 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 572 FADC 200 ns + Laser 500 kHz (ps=129) + coda rate (~4 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 573 FADC 200 ns + Laser 1MHz (ps=129 saturated) + coda rate (7 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 574 FADC 200 ns + Laser 1MHz (ps=257) + coda rate (~4 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 575 FADC 200 ns + Laser 200 kHz (ps=33) + coda rate (~6 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 576 FADC 200 ns + Laser 100 kHz (ps=17) + coda rate (~6 kHz) + tune 50%, wheel2+paper + ssp gain (40% of gain "ssp" 577 FADC 200 ns + Laser 100 kHz (ps=17) + coda rate (~6 kHz) + tune 50%, wheel3 + ssp gain (gain "ssp850Vgainmap" 610 FADC 200 ns + Laser 1Mz (ps=257) + LED at 2.3 V coda rate (~ 3.8kHz) + tune 50%, wheel2 + ssp gain (gain "sspLowergainmap"+ PED + TET 50 612 FADC 200 ns + Laser 1Mz (ps=257) + LED at 3 MHz+ (coda rate ~ 3.8kHz) + tune 50%, wheel2 + ssp gain (gain "sspLowergainmap" PED + TET 100 613 FADC 200 ns + Laser 1Mz (ps=257) + 2 LED at 5MHz (coda rate ~ 3.8kHz) + tune 50%, wheel2 + ssp gain (gain "sspLowergainmap" PED + TET 50 (comment sum signal is saturated) 614 FADC 200 ns + Laser 1Mz (ps=513) + 2 LED at 5MHz (coda rate ~ 3.8kHz) + tune 50%, wheel2 + ssp gain (gain "sspLowergainmap" PED + TET 50 (comment sum signal is saturated) 622 FADC 200 ns + Laser 1Mz (ps=257) + 2 LED at 5MHz (coda rate ~ 3.8kHz) + tune 50%, wheel3 + ssp gain (gain "sspLowergainmap" PED + TET 50 623 FADC 200 ns + Laser 1Mz (ps=257) + 2 LED at 5MHz (coda rate ~ 3.8kHz) + tune 50%, wheel3 + ssp gain (gain "sspLowergainmap" PED + TET 50 624 FADC 200 ns + Laser 1Mz (ps=257) + 2 LED at 5MHz (coda rate ~ 3.8kHz) + tune 50%, wheel2 + paper + ssp gain (gain "sspLowergainmap" PED + TET 50 625 FADC 200 ns + Laser 1Mz (ps=257) + 2 LED at 5MHz (coda rate ~ 3.8kHz) + tune 50%, wheel2 + paper + ssp gain (gain "sspLowergainmap" PED + TET 50 626 FADC 200 ns trigger 1Mz (ps=257) + Only LED at (coda rate ~ 3.8kHz) + No laser + ssp gain (gain "sspLowergainmap" PED + TET 50 627 FADC 256 ns trigger 1Mz (ps=257) + Only LED at (coda rate ~ 3.8kHz) + No laser + ssp gain (gain "sspLowergainmap" PED + TET 50 630 FADC 256 ns trigger 1Mz (ps=257) + Only LED (lower 2.15 V )at (coda rate ~ 3.8kHz) + No laser + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 632 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.15 V )at (coda rate ~ 3.8kHz) + 1 MHz laser (wheel2+ paper) + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 633 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.15 V )at (coda rate ~ 3.8kHz) + 1 MHz laser (wheel3+ paper) + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 634 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.15 V )at (coda rate ~ 3.8kHz) + 1 MHz laser (wheel3+ paper) + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 635 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.11 V )at (coda rate ~ 3.8kHz) + Laser off + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 637 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.11 V )at (coda rate ~ 3.8kHz) + Laser wheel 2 + paper + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 638 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.11 V )at (coda rate ~ 3.8kHz) + Laser wheel 3 + paper + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 639 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.09 V )at (ssp scaler 44 KHz) + Laser off + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 640 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.09 V )at (ssp scaler 44 KHz) + 1 MZ Laser wheel 2 + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 641 FADC 256 ns trigger 1Mz (ps=257) + LED (lower 2.09 V )at (ssp scaler 44 KHz) + 1 MZ Laser wheel 3 + ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 642 FADC 256 ns trigger 1Mz (ps=257) NO LED at (ssp scaler ?? KHz) + 1 MZ Laser wheel 3 + paper ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 (comment signal is too weak) 643 FADC 256 ns trigger 1Mz (ps=257) NO LED at (ssp scaler ?? KHz) + 1 MZ Laser wheel 3 NO PAPER ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 644 FADC 256 ns trigger 1Mz (ps=257) LED at 2.09 (ssp scaler ?? KHz) + 1 MZ Laser wheel 3 NO PAPER ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 (FADCSSP MODE should not effect but check) 645 FADC 256 ns trigger 1Mz (ps=257) LED at 2.09 (ssp scaler ?? KHz) + 1 MZ Laser wheel 3 NO PAPER ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 646 FADC 256 ns trigger 1Mz (ps=257) LED at 2.10 (ssp scaler 68 KHz) + (1 MZ Laser) LASER OFF ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 647 FADC 256 ns trigger 1Mz (ps=257) LED at 2.10 (ssp scaler 68 KHz) + (1 MZ Laser) LASER Wheel 3 (no paper) ssp gain (gain "sspLowergainmap" PED + TET 00 PED =0 ============== Study of flat background with masking first channel (saturation of number of hits)=============== 650 trigger 1MHz (ps=257) LED 2.10 V, LASER OFF only first pixel enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 651 trigger 1MHz (ps=257) LED 2.11 V, LASER OFF only first pixel enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 652 trigger 1MHz (ps=257) LED 2.15 V, LASER OFF only first pixel enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 653 trigger 1MHz (ps=257) LED 2.15 V, LASER OFF ALL CHANNEL ENABLED enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 654 trigger 1MHz (ps=257) LED 2.13 V, LASER OFF ALL CHANNEL ENABLED enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 655 trigger 1MHz (ps=257) LED 2.13 V, LASER OFF only first pixel enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 656 trigger 1MHz (ps=257) LED 2.12 V, LASER OFF, ALL CHANNEL ENABLED enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 657 trigger 1MHz (ps=257) LED 2.12 V, LASER OFF, Only First CHANNEL ENABLED enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 658 trigger 1MHz (ps=257) LED 2.11 V, LASER OFF, Only First CHANNEL ENABLED enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 659 trigger 1MHz (ps=257) LED 2.11 V, LASER OFF, ALL CHANNEL ENABLED enabled rest masked gain "sspLowergainmap" PED + TET 00 PED =0 ====CODA RUNS LED At 2.12 V ======ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (40% less than HV850 gain=========== Run 662 Trigger_rate = 1MHz, PS=257, LASER Wheel3, LED 2.12 V, gain "sspLowergainmap", PED + TET 00 ==========From this point gain map "ssp.cnfgain64_th250" === uniform gain of 64 and threshold 250================= Run 668 trigger rate = 10 kHz (ps = 3) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) Run 669 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) [comment RICH decoder crashes) Run 670 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) [comment RICH decoder crashes) Run 670 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) [RICH_decoder Crash] ======== SSP time window test Run 685 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) SSP WINDOW = 200ns Run 686 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) SSP WINDOW = 300ns Run 687 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) SSP WINDOW = 400ns ====Now Wheel 2 Only NO LED at different Laser frequency const SSP time ==400 ns ===== Run 687 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) Run 688 trigger rate = 200 KHz (ps = 129) + Laser_Wheel_2 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) ====Now Wheel 3 Only NO LED at different Laser frequency const SSP time ==400 ns ===== Run 690 trigger rate = ! MHz (ps = 257) + Laser_Wheel_3 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) (Don;t confuse with reverse order of run its TRUE) Run 689 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_3 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) Run 691 trigger rate = 200 KHz (ps =65) + Laser_Wheel_3 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) Run 693 trigger rate = 100 KHz (ps = 33) + Laser_Wheel_3 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) Run 694 trigger rate = 300 KHz (ps = 129) + Laser_Wheel_3 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) Run 696 trigger rate = 700 KHz (ps = 257) + Laser_Wheel_3 + LED OFF () + TET = 0 , PED = 0 (gain 64 Thresh 250) =====WHEEL 2 + PAPER + LOWER GAIN MAP "ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser" Run 705 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2_PAPER + LED OFF () + TET = 0 , PED = 0 (low gain ) Run 706 trigger rate = 700 KHz (ps =257) + Laser_Wheel_2_PAPER + LED OFF () + TET = 0 , PED = 0 (low gain ) Run 707 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_2_PAPER + LED OFF () + TET = 0 , PED = 0 (low gain ) Run 708 trigger rate = 300 KHz (ps = 129) + Laser_Wheel_2_PAPER + LED OFF () + TET = 0 , PED = 0 (low gain ) Run 709 trigger rate = 200 KHz (ps = 65) + Laser_Wheel_2_PAPER + LED OFF () + TET = 0 , PED = 0 (low gain ) Run 710 trigger rate = 100 KHz (ps = 33) + Laser_Wheel_2_PAPER + LED OFF () + TET = 0 , PED = 0 (low gain ) ==== WHEEL 3 + PAPER + Uniform gain map " Run 712 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_3_PAPER + LED OFF () + TET = 0 , PED = 0 (uniform 64 gain map) Run 713 trigger rate = 700 KHz (ps = 257) + Laser_Wheel_3_PAPER + LED OFF () + TET = 0 , PED = 0 (uniform 64 gain map) Run 716 trigger rate = 500 KHz (ps = 129) + Laser_Wheel_3_PAPER + LED OFF () + TET = 0 , PED = 0 (uniform 64 gain map) Run 717 trigger rate = 300 KHz (ps = 129) + Laser_Wheel_3_PAPER + LED OFF () + TET = 0 , PED = 0 (uniform 64 gain map) Run 718 trigger rate = 200 KHz (ps = 65) + Laser_Wheel_3_PAPER + LED OFF () + TET = 0 , PED = 0 (uniform 64 gain map) Run 719 trigger rate = 100 KHz (ps = 33) + Laser_Wheel_3_PAPER + LED OFF () + TET = 0 , PED = 0 (uniform 64 gain map) ==================LED AT 2.12 V ONLY ================ Run 720 coda rate = 300 KHz (ps = 257) + Laser0 OFF + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) Run 722 SSP width 200 ns + Laser0 OFF + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) ===============Adding Wheel 3 + + PAPER at different frequencies =========== Run 721 coda rate = 3.8 KHz (ps = 257) + Laser 1MZ WH3+ PAPER + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) Run 723 coda rate = 2. KHz (ps = 257) + Laser 500 kHZ WH3+ PAPER + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) Run 724 coda rate = 3. KHz (ps = 65) + Laser 200 kMZ WH3+ PAPER + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) Run 725 coda rate = 1. KHz (ps = 65) + Laser 100 kHZ WH3+ PAPER + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) Run 726 coda rate = 1. KHz (ps = 257) + Laser 700 kHZ WH3+ PAPER + LED 2.12 V () + TET = 0 , PED = 0 (uniform 64 gain map) ===========ADDING WHEEL 2 + PAPER AND LOWER GAIN "ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser"============ Run 728 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.12 V ) + TET = 0 , PED = 0 (low gain ) Run 729 trigger rate(2.5) = 700 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.12 V ) + TET = 0 , PED = 0 (low gain ) Run 730 trigger rate(2) = 500 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.12 V ) + TET = 0 , PED = 0 (low gain ) Run 731 trigger rate(0.75) = 200 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.12 V ) + TET = 0 , PED = 0 (low gain ) Run 733 trigger rate(0.30 KHz) = 100 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.12 V ) + TET = 0 , PED = 0 (low gain ) =====ONLY LED AT 2.15 ========AND LOWER GAIN "ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser"================ Run 734 trigger rate = 400Hz (ps = 257) LASER OFF + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) Run 735 trigger rate = 4 KHz (ps = 257) LASER 1MHZ WHEEL 2 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) Run 736 trigger rate = 2.5 KHz (ps = 257) LASER 700 KHZ WHEEL 2 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) Run 737 trigger rate = 2 KHz (ps = 257) LASER 500 KHZ WHEEL 2 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) Run 738 trigger rate = 1.1 KHz (ps = 257) LASER 300 KHZ WHEEL 2 + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) Run 739 trigger rate = 0.75 KHz (ps = 257) LASER 200 KHZ WHEEL 2 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) Run 740 trigger rate = 0.4 KHz (ps = 257) LASER 100 KHZ WHEEL 2 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (low gain ) ====== WHEEL 3 + PAPER + LED 2.15 V Uniform gain map "ssp.cnfgain64_th250" Run 742 trigger rate = 4 KHz (ps = 257) LASER 1000 KHZ WHEEL 3 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (gain 64 ) Run 743 trigger rate = 2.5 KHz (ps = 257) LASER 700 KHZ WHEEL 3 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (gain 64 ) Run 744 trigger rate = 2.0 KHz (ps = 257) LASER 500 KHZ WHEEL 3 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (gain 64 ) Run 745 trigger rate = 1.2 KHz (ps = 257) LASER 300 KHZ WHEEL 3 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (gain 64 ) Run 746 trigger rate = 0.75 KHz (ps = 257) LASER 200 KHZ WHEEL 3 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (gain 64 ) Run 747 trigger rate = 0.35 KHz (ps = 257) LASER 100 KHZ WHEEL 3 PAPER + LED (2.15 V ) + TET = 0 , PED = 0 (gain 64 ) =============LED 2.09 V Wheel 3 + PAPER Uniform gain map ======== Run 750 trigger rate = 4 KHz (ps = 257) LASER 1000 KHZ WHEEL 3 PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (gain 64 ) Run 751 trigger rate = 2.5 KHz (ps = 257) LASER 700 KHZ WHEEL 3 PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (gain 64 ) Run 752 trigger rate = 2.0 KHz (ps = 257) LASER 500 KHZ WHEEL 3 PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (gain 64 ) Run 753 trigger rate = 1.2 KHz (ps = 257) LASER 300 KHZ WHEEL 3 PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (gain 64 ) Run 754 trigger rate = 0.75 KHz (ps = 257) LASER 200 KHZ WHEEL 3 PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (gain 64 ) Run 755 trigger rate = 0.35 KHz (ps = 257) LASER 100 KHZ WHEEL 3 PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (gain 64 ) =============LED 2.09 V Wheel 2 + PAPER Uniform gain map ======== Run 749 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (uniform 64 ) Run 756 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (low gain 50% of HAOO37 ) COMMENT: Both uniform gain 64 and 50% of HA0037 saturates FADC Run 757 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (low gain 40% of HA0037) Run 758 trigger rate(2.5) = 700 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain 40% of HA0037) Run 759 trigger rate(2) = 500 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0= PED (low gain 40% of HA0037 ) Run 760 trigger rate(1.2) = 300 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain 40% of HA0037) Run 761 trigger rate(0.75) = 200 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain 40% of HA0037) Run 762 trigger rate(0.30 KHz) = 100 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain40% of HA0037 ) ======LED 2.09 V======== Gain Map Similar to 2.12 and 2.15 LED Volt 764 -769) Run 764 trigger rate = 1 MHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0 , PED = 0 (low gain) Run 765 trigger rate(2.5) = 700 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain) Run 766 trigger rate(2) = 500 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0= PED (low gain ) Run 767 trigger rate(1.2) = 300 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain) Run 768 trigger rate(0.75) = 200 kHz (ps = 257) + Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain ) Run 769 trigger rate(0.30 KHz) = 100 kHz (ps = 257)+ Laser_Wheel_2_PAPER + LED (2.09 V ) + TET = 0=PED (low gain) =====ONLY LED AT 2.09 V====== Run 763 trigger rate (0.30 KHz) (ps =257) LASER OFF LED 2.09 V low gain40% of HA0037) ====== Wheel 3 ONLY ===2.09 V ==== Run 770 trigger rate = 0 MHz (ps = 257) + Laser OFF + LED (2.09 V ) + TET =0=PED (gain 64) Run 771 trigger rate(3.8) = 1000 kHz (ps = 257) + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET = 0=PED (gain 64) Run 777 trigger rate(3.8) = 1000 kHz (ps = 257) + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET=0=PED (gain 64) Run 772 trigger rate(2.5) ps = 257) 700 kHz + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET =0=PED (gain 64) Run 773 trigger rate (2) (ps = 257) 500 kHz + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET =0=PED (gain 64) Run 774 trigger rate(1.2) (ps = 257) 300 kHz + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET =0=PED (gain 64) Run 775 trigger rate (0.75)(ps = 257) 200 kHz + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET=0=PED (gain 64) Run 776 trigger rate (0.30 (ps = 257) 100 kHz + Laser Wheel 3 (ONLY) + LED (2.09 V ) + TET=0=PED (gain 64) ====== Wheel 3 ONLY ===2.15 V ==== Run 781 trigger rate = 0 MHz (ps = 257) + Laser OFF + LED (2.15 V ) + TET = 0=PED (gain 64) Run 782 trigger rate(3.8) 1000 kHz (ps = 257) + Laser Wheel 3 (ONLY) + LED (2.15 V ) + TET = 0=PED (gain 64) Run 783 trigger rate(3.8) 700 kHz (ps = 257) + Laser Wheel 3 (ONLY) + LED (2.15 V ) + TET = 0=PED (gain 64) Run 784 trigger rate(2.5) ps= 257) 500 kHz + Laser Wheel 3 (ONLY) + LED (2.15 V ) + TET = 0=PED (gain 64) Run 785 trigger rate (2) (ps= 257) 300 kHz + Laser Wheel 3 (ONLY) + LED (2.15 V ) + TET = 0 =PED = 0 (gain 64) Run 786 trigger rate(1.2) (ps= 257) 200 kHz + Laser Wheel 3 (ONLY) + LED (2.15 V ) + TET = 0=PED (gain 64) Run 787 trigger rate (0.75)(ps= 257)100 kHz +Laser Wheel 3 (ONLY) + LED (2.15 V ) + TET = 0= PED (gain 64) =================TEST OF GAIN MAP ==LED OFF REFERENCE RUNS WHEEL 3 ONLY ==== gain >> ssp.cnf_thrHV98fC850V_gainmap => Wheel 3 ONLY ==LED =============Uniform Gain 64================ Run 788 1000 KHz ssp.cnf_thr230_gain64 Run 789 700 KHz ssp.cnf_thr230_gain64 Run 790 500 KHz ssp.cnf_thr230_gain64 Run 791 300 KHz ssp.cnf_thr230_gain64 Run 792 200 KHz ssp.cnf_thr230_gain64 Run 793 100 KHz ssp.cnf_thr230_gain64 =============gain main 850HV================ Run 797 1000 KHz gain >> ssp.cnf_thrHV98fC850V_gainmap Run 798 500 kHz gain >> ssp.cnf_thrHV98fC850V_gainmap Run 803 200 kHz (??) may be interpurted in between gain >> ssp.cnf_thrHV98fC850V_gainmap =============For wheel 3 which is some factor times HA0037 gain ================ Run 795 1000 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 796 500 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 801 200 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 802 100 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 =============0.40 times HA0037 gain ================ Run 799 1000 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 800 500 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) =========NOW WHEEL 3 + PAPER=========== =============Uniform Gain 64================ Run 805 1000 KHz ssp.cnf_thr230_gain64 Run 806 700 KHz ssp.cnf_thr230_gain64 Run 807 500 KHz ssp.cnf_thr230_gain64 Run 808 300 KHz ssp.cnf_thr230_gain64 Run 809 200 KHz ssp.cnf_thr230_gain64 Run 810 100 KHz ssp.cnf_thr230_gain64 Run 811 1000 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 812 700 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 813 500 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 814 200 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 815 100 KHz ssp.cnf_thrHV98fC850V_gainmap_gainHA0037_ForLaserWh3 Run 816 1000 KHz gain >> ssp.cnf_thrHV98fC850V_gainmap Run 817 500 kHz gain >> ssp.cnf_thrHV98fC850V_gainmap Run 818 200 KHz gain >> ssp.cnf_thrHV98fC850V_gainmap Run 819 100 kHz gain >> ssp.cnf_thrHV98fC850V_gainmap Run 820 1000 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 821 500 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) ================END OF WHEEL ================ =============WHEEL 2 + PAPER REFERENCE RUNS ==NO LED ======================= Run 822 1000 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 823 700 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 824 500 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 825 300 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 826 100 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (first four lines) Run 829 500 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (2nd four lines 40% of HA0037) Run 830 300 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (2nd four lines 40% of HA0037) Run 831 200 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (2nd four lines 40% of HA0037) Run 832 100 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (2nd four lines 40% of HA0037) Run 833 1000 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (2nd four lines 40% of HA0037) Run 834 700 KHz ssp.cnf_thrHV98fC850V_gainmap_withlowerGain_forLaser (2nd four lines 40% of HA0037)
